MH-4 Mobile Crane Operator

Aims

This course is designed to give participants the necessary skills and knowledge to operate a mobile crane (wheeled or crawler) on BSP onshore facilities. Strong emphasis is on the Brunei Shell lifting and hoisting BSP-004 The course will also refresh and update participants in the most recent updates in procedures and safety in operating/ checking of mobile cranes.
Crane classes:
• C4: up to 20 Ton capacity
• C3: 21 up to 60 Ton capacity
• C2: 61 up to 100 Ton capacity
• Any capacity

Content

Explained the Shell and Government Laws and Regulations
Use of correct PPE
Be able to list and explain the key HSE requirements specific to lifting operations
Have a knowledge of the Company HSE policy
Have knowledge of how to carry out hazard identification and assessment of controls needed to execute the lifting operation
Have knowledge of the need for Permit to Work required
Have knowledge of the 10 questions for a safe lift
Have basic knowledge of PAKAT
Be able to undertake risk assessment relating to various lifts and hazards encountered.
Understand and be fully aware of the different methods for on-site communications, including hand signals and radio used within the company
Be able to list and explain the principles of lifting dynamics (balancing and stability) and security for the safe lifting, shifting and placement of typical workplace loads
Be able to refer to and understand relevant manufacturers or companies handbooks and manuals
Be able to carry out Pre and Post operational checks as per enterprise and manufacturers requirements
Be able to understand the requirements of routine cleaning and operator inspections on specific cranes
Be able to explain what actions must be taken in the event of a breakdown and or identify faults on their cranes
Be able to understand and explain the applications of the crane load chart and correct and safe use of load cell indicators.
Be able to understand the principles of safe lifting to determine incorporating capacities and capabilities on specific cranes
Be able to demonstrate safe and smooth movement of the crane into position
Be able to undertake correct set-up procedure including checking ground conditions, stabilizer and packing set up undertake appropriate checks
Be able to determine the capabilities of cranes by reading and understanding respective load charts
Be able to identify from a variety of load shapes and densities a cranes limitations using load charts
Be able to comprehend simple and complex lift plans
Be able to safely operate crane under supervision of a competent Banksman
Be able to demonstrate:

• Lifting

• Luffing

• Slewing

• Pick and carry operations

• Emergency stop with load

• Standing loads vertical

• Landing loads onto pre-determined landing points including: ground level; below ground level; in confined or restricted space; over obstacles; blindly (under direction of Banksman)

Demonstrate and explain the safe use of specified crane clutches
Be able to demonstrate and explain the effect and strategies to control the effects of bad weather on dynamic loads
Be able to identify and explain the safety devices fitted on the crane

Assessment:
Written knowledge assessment
Practical assessment

Location and Duration

The duration of the course is 5-days. The course is delivered at Megamas Training Company Sdn. Bhd., in Mumong/Kuala Balai, Kuala Belait or suitable client facility.

Pre-Requisite

Rigging&Slinging

Validity

3 years

Medical Required

Delegates

Maximum number 6

Approval

No Approval required